Sign In Start Free Trial
Account

Add to playlist

Create a Playlist

Modal Close icon
You need to login to use this feature.
  • Raspberry Pi Sensors
  • Toc
  • feedback
Raspberry Pi Sensors

Raspberry Pi Sensors

By : Rushi Gajjar
4.4 (9)
close
Raspberry Pi Sensors

Raspberry Pi Sensors

4.4 (9)
By: Rushi Gajjar

Overview of this book

This book is perfect for hardware enthusiasts who want to develop amazing projects using Raspberry Pi. Some knowledge and experience working with Linux, C, and Python is a plus, but once you're set up to go, you'll be ready to push the creative capabilities of your Raspberry Pi even further.
Table of Contents (10 chapters)
close
9
Index

It's time to glow LEDs!

Let's gather some components and wires first. You need a standard LED (one piece, forward voltage, and 3.3V), wires (one red and one black, with a 2.54 mm female-to-female jumper wire connector), an Ethernet cable, your PC, and the RasPi+.

The standard setup that we had all the time and we will follow is PC (Windows/Mac/Linux) with PuTTY or the terminal installed. There is also the Ethernet connection of the PC with the RasPi, with the entire configuration and setup explained in Chapter 1, Meeting Your Buddy – the Raspberry Pi. What I assume now is that your PC is running a live session with the RasPi. Take the LED in your hand and carefully observe that among the two terminals, one terminal is longer than the other; this is the positive (anode) terminal of the LED. The shorter terminal on LED is negative (ground) and it should be connected to pin 6 (GND) of the RasPi. Carefully connect the positive terminal to pin 11 (BCM GPIO 17, refer to GPIO table...

bookmark search playlist font-size

Change the font size

margin-width

Change margin width

day-mode

Change background colour

Close icon Search
Country selected

Close icon Your notes and bookmarks

Delete Bookmark

Modal Close icon
Are you sure you want to delete it?
Cancel
Yes, Delete