python-gpio

The latest distribution of the RasPi comes with python-gpio installed, but this library will be necessary for those who have an old distribution installed. The python-gpio library allows you to easily access and control the GPIO pins while running the Python script. This library can be downloaded from the Python organization's website, but we will install it using the LXTerminal or PuTTY. Let's proceed by downloading the .tar file:

wget https://pypi.python.org/packages/source/R/RPi.GPIO/RPi.GPIO-0.5.7.tar.gz

If you aren't aware, let me tell you that a TAR file is a kind of bundled file used to make the download compact and easy. We need to extract the downloaded file in a directory:

tar -xf RPi.GPIO-0.5.7.tar.gz

Let's rename this folder for ease of use; use this command:

mv RPi.GPIO-0.5.7 python_gpio

Move to the python-gpio directory to install the library using this command:

cd python_gpio

Now, we will install this library:

sudo python setup.py install

There is a possibility that it gives you a response that the library is already installed with the latest version. After this process, if you want to remove the downloaded file, you can use the rm command and remove it. Finally, one more library that provides support for the Python Serial Peripheral Interface (SPI) protocol on GPIO is spidev. You can install it using the following command. You can refer to the Serial Peripheral Interface section of Chapter 2, Meeting the World of Electronics, to learn more on SPI protocol. We will be using the SPI protocol in Chapter 6, Uploading Data Online – Spreadsheets, Mobile, and E-mails, when we build the sensor station project to send sensor data on web pages.

sudo pip install spidev